The Login Screen; Command Syntax Conventions - ZyXEL Communications ZyXEL Dimension ES-4124 User Manual

Chapter 45 Introducing Commands
• 9600 bps
• No parity
• 8 data bits
• 1 stop bit
• No flow control
45.2.1.1 Initial Screen
When you turn on your Switch, it performs several internal tests as well as line initialization.
You can view the initialization information using the console port. After the initialization, the
login screen displays (refer to
Copyright (c) 1994 - 2007 ZyXEL Communications Corp.
initialize mgmt, ethernet address: 00:13:49:00:00:01
initialize switch, ethernet address: 00:13:49:00:00:02
Initializing switch unit 0...
Initializing MSTP.............
Initializing VLAN Database...
Initializing IP Interface...
Initializing Advanced Applications...
Initializing Command Line Interface...
Initializing Web Interface...
Press ENTER to continue...
Use the following steps to telnet into your Switch.
1 For local management, connect your computer to the RJ-45 management port (labeled
MGMT) on the Switch.
2 Make sure your computer IP address and the Switch IP address are on the same subnet.
In Windows, click Start (usually in the bottom left corner), Run and then type
192.168.0.1
3 A login screen displays (refer to

45.3 The Login Screen

After you have successfully established a connection to the Switch using a direct console
connection or Telnet, a login screen displays as shown below. For your first login, enter the
default administrator login username "admin" and password "1234".

45.4 Command Syntax Conventions

The rules of the commands are listed next.
• The command keywords are in
332
Section 45.3 on page
(the default management IP address) and click OK.
Section 45.3 on page
Enter User Name : admin
Enter Password : XXXX
courier new font
332).
332).
.
ES-4124 User's Guide
telnet