Ospf Configuration - ZyXEL Communications ZyXEL Dimension ES-4124 User Manual

Table 87 OSPF Status: Common Output Fields (continued)
FIELD
State
Priority
Designated
Router
Backup
Designated
Router
Time Intervals
Configured
Neighbor Count
Adjacent
Neighbor Count
Neighbor
Neighbor ID
Pri
State
Dead Time
Address
Interface
Link State Database
Link ID
ADV Router
Age
Seq #
Checksum
Link Count

28.3 OSPF Configuration

Use this screen to activate OSPF and set general settings. Click IP Application > OSPF and
the Configuration link to display the OSPF Configuration screen. See
233 for more information on OSPF.
ES-4124 User's Guide
DESCRIPTION
This field displays the state of the Switch (backup or DR (designated router)).
This field displays the priority of the Switch. This number is used in the designated
router election.
This field displays the router ID of the designated router.
This field displays the router ID of a backup designated router.
This field displays the time intervals (in seconds) configured.
This field displays the number of neighbor routers.
This field displays the number of neighbor router(s) that is adjacent to the Switch.
This field displays the router ID of the neighbor.
This field displays the priority of the neighbor. This number is used in the
designated router election.
This field displays the state of the neighbor (backup or DR (designated router)).
This field displays the dead time in seconds.
This field displays the IP address of a neighbor.
This field displays the MAC address of a device.
This field displays the ID of a router or subnet.
This field displays the IP address of the layer-3 device that sends the LSAs.
This field displays the time (in seconds) since the last LSA was sent.
This field displays the link sequence number of the LSA.
This field displays the checksum value of the LSA.
This field displays the number of links in the LSA.
Chapter 28 OSPF
Section 28.1 on page
237