Figure 31-21 Interface Bpdu-Control Command Example; Figure 31-22 Broadcast-Limit Command Example - ZyXEL Communications GS-3012 User Manual

Enable ports one, three, four and five for configuration.
Set the BPDU control to tunnel, to forward BPDUs received on ports one, three, four and five.
ras(config)# interface 1,3-5
ras(config-interface)# bpdu-control tunnel
ras(config-interface)#
31.8.3 broadcast-limit
Syntax:
broadcast-limit
broadcast-limit <pkt/s>
where
<pkt/s>
An example is shown next.
Enable port one for configuration.
Enable broadcast control.
Set the number of broadband packets the interface receives per second
ras(config)# interface port-channel 1
ras(config-interface)# broadcast-limit
ras(config-interface)# broadcast-limit 21
31.8.4 bandwidth-limit
Syntax:
bandwidth-limit
bandwidth-limit pir <Kbps>
bandwidth-limit cir <Kbps>
bandwidth-limit egress <Kbps>
where
<Kbps>
An example is shown next.
Enable port one for configuration.
Command Examples

Figure 31-21 interface bpdu-control Command Example

Enables broadcast storm control limit on the switch.
Sets how many broadcast packets the interface receives per second.

Figure 31-22 broadcast-limit Command Example

Enables bandwidth control on the switch.
Sets the maximum bandwidth allowed for outgoing traffic (egress) or
incoming traffic (ingress) on the switch.
GS-3012/GS-3012F User's Guide
31-11