Igmp Filtering Profile; Figure 84 Advanced Application > Multicast > Multicast Setting > Igmp Filtering Profile; Table 57 Advanced Application > Multicast > Multicast Setting > Igmp Filtering Profile - ZyXEL Communications ZyXEL Dimension ES-4124 User Manual
Intelligent layer 3+ switch
Hide thumbs
Also See for ZyXEL Dimension ES-4124:
- User manual (372 pages) ,
- Release note (9 pages) ,
- Specifications (4 pages)
Table of Contents
Advertisement
Chapter 22 Multicast
Table 56 Advanced Application > Multicast > Multicast Setting > IGMP Snooping VLAN
LABEL
Index
Name
VID
Delete
Cancel
22.5 IGMP Filtering Profile
An IGMP filtering profile specifies a range of multicast groups that clients connected to the
Switch are able to join. A profile contains a range of multicast IP addresses which you want
clients to be able to join. Profiles are assigned to ports (in the Multicast Setting screen).
Clients connected to those ports are then able to join the multicast groups specified in the
profile. Each port can be assigned a single profile. A profile can be assigned to multiple ports.
Click Advanced Applications > Multicast > Multicast Setting > IGMP Filtering Profile
link to display the screen as shown.
Figure 84 Advanced Application > Multicast > Multicast Setting > IGMP Filtering Profile
The following table describes the labels in this screen.
Table 57 Advanced Application > Multicast > Multicast Setting > IGMP Filtering Profile
LABEL
Profile Name
Start Address
End Address
180
DESCRIPTION
This is the number of the IGMP snooping VLAN entry in the table.
This field displays the descriptive name for this VLAN group.
This field displays the ID number of the VLAN group.
Check the rule(s) that you want to remove in the Delete column, then click the
Delete button.
Click Cancel to clear the Delete check boxes.
DESCRIPTION
Enter a descriptive name for the profile for identification purposes.
To configure additional rule(s) for a profile that you have already added, enter the
profile name and specify a different IP multicast address range.
Type the starting multicast IP address for a range of multicast IP addresses that
you want to belong to the IGMP filter profile.
Type the ending multicast IP address for a range of IP addresses that you want to
belong to the IGMP filter profile.
If you want to add a single multicast IP address, enter it in both the Start Address
and End Address fields.
ES-4124 User's Guide
Advertisement
Table of Contents
Troubleshooting
