Figure 101 Ip Source Guard Static Binding; Table 70 Ip Source Guard Static Binding - ZyXEL Communications ZyXEL Dimension ES-4124 User Manual

Chapter 24 IP Source Guard

Figure 101 IP Source Guard Static Binding

The following table describes the labels in this screen.

Table 70 IP Source Guard Static Binding

LABEL
MAC Address
IP Address
VLAN
Port
Add
Cancel
Clear
Index
MAC Address
IP Address
Lease
Type
VLAN
Port
Delete
Cancel
208
DESCRIPTION
Enter the source MAC address in the binding.
Enter the IP address assigned to the MAC address in the binding.
Enter the source VLAN ID in the binding.
Specify the port(s) in the binding. If this binding has one port, select the
first radio button and enter the port number in the field to the right. If this
binding applies to all ports, select Any.
Click this to create the specified static binding or to update an existing one.
Click this to reset the values above based on the last selected static
binding or, if not applicable, to clear the fields above.
Click this to clear the fields above.
This field displays a sequential number for each binding.
This field displays the source MAC address in the binding.
This field displays the IP address assigned to the MAC address in the
binding.
This field displays how long the binding is valid.
This field displays how the Switch learned the binding.
static: This binding was learned from information provided manually by an
administrator.
This field displays the source VLAN ID in the binding.
This field displays the port number in the binding. If this field is blank, the
binding applies to all ports.
Select this, and click Delete to remove the specified entry.
Click this to clear the Delete check boxes above.
ES-4124 User's Guide