Figure 64 Ospf Configuration: Activating And General Settings; Table 52 Ospf Configuration: Activating And General Settings - ZyXEL Communications GS-4024 User Manual

Figure 64 OSPF Configuration: Activating and General Settings

The follow table describes the related labels in this screen.

Table 52 OSPF Configuration: Activating and General Settings

LABEL
Active
Router ID
Redistribute
Route
Active
Type
Metric Value Enter a route cost (between 0 and 16777214).
Apply
Cancel
Chapter 24 OSPF
DESCRIPTION
OSPF is disabled by default. Select this option to enable it.
Router ID uniquely identifies the switch in an OSPF. Enter a unique ID (that uses the
format of an IP address in dotted decimal notation) for the switch.
Route redistribution allows your switch to import and translate external routes learned
through other routing protocols (RIP and Static) into the OSPF network transparently.
Select this option to activate route redistribution for routes learn through the selected
protocol.
Select 1 for routing protocols (such as RIP) whose external metrics are directly
comparable to the internal OSPF cost. When selecting a path, the internal OSPF cost is
added to the AB boundary router to the external metrics.
Select 2 for routing protocols whose external metrics are not comparable to the OSPF
cost. In this case, the external cost of the AB boundary router is used in path decision to
a destination.
Click Apply to save the changes.
Click Cancel to start configuring the above fields again.
GS-4024 User's Guide
151