Alinx AC7010C User Manual page 4

The two core boards of the ALINX XILINX ZYNQ7000 development
platform were officially released in 2022, models: AC7010C and AC7020C
(industrial grade). Their development platform is the solution for XILINX's
Zynq7000 SOC chip. It uses ARM+FPGA SOC technology to integrate
dual-core ARM Cortex-A9 and FPGA programmable logic on a single chip. The
AC7010C core board uses Xilinx's Zynq7000 series XC7Z010-1CLG400C as
the core processor, and the AC7020C core board uses the industrial grade
XC7Z020-2CLG400I chip. Extensive peripheral interfaces such as Gigabit
Ethernet, USB2.0, serial port, SD card, etc. are extended on the ARM side. In
addition, the core board expands a large number of IOs to the outer three
connectors, including 94 IO ports of the PL (47 pairs of LVDS differential) and 8
MIO ports of the PS. For users who need a lot of IO, this core board will be a
good choice, and it is also very suitable for secondary development.
The design of the core board adheres to the design concept of "exquisite,
practical and concise". It is not only suitable for the software verification of the
software staff, but also suitable for the hardware design of hardware
developers, that is, the system cooperation of software and hardware, and
accelerated the development process of the project.
www.alinx.com
AC7010C / AC7020C User Manual
4 / 40