Table of Contents
Advertisement
Setting up an Open VXI System
Installing Agilent 81200 Modules into External PC VXI Systems
Install Agilent 81200 System Components
The Agilent 81200 System consists of one or multiple modules building the complete system. All
modules must be kept together, other VXI modules can be added to the cardcage but must be
plugged into adjacent slots of the cardcage.
Please refer to
Addresses and how to install the modules.
Connect Interface Cable
Connect one end of the interface cable to the PC I_O card you installed during configuring your
PC. Connect the other end of the cable to the Slot 0 Controller card.
If you have GP-IB Rack & Stack equipment in your system, you can also connect the GP-IB cable
to the Rack & Stack instruments.
Install Libraries and User Software
1 Install the applicable I_O Library on the PC, if not already done as part of the HP VEE
2 Install the Agilent 81200 User Software E4873A on your PC following
42
"Adding a Module" on page 56
installation process or an adequate program.The version of the HP I/O Library must be
G.xx.xx.xx or higher.
& Update" on page
51.
for details on how to set VXI Instrument Logical
"Software Installation
Advertisement
Table of Contents
