Install The Agilent Io Libraries Suite - Agilent Technologies U2300A Series User Manual

B. Install the Agilent IO Libraries Suite
N O T E
U2300A Series DAQ User's Guide
It is recommended to install the latest version of Agilent IO
Libraries.
You must have Administrator privileges to install Agilent IO Libraries Suite and to
run Connection Expert.
1 Verify that your PC meets the minimum system requirements.
(See "A. Check Your System Requirements"
2 If you are upgrading to IO Libraries Suite from a previous
version of IO Libraries, you must remove the instruments and
interfaces listed below before you upgrade your software. This
step is necessary in order for these devices to obtain the correct
drivers to work with Agilent IO Libraries Suite.
a Disconnect any USB instruments from your PC.
b Disconnect any Agilent 82357 USB/GPIB interface converters
from your PC.
c Disconnect any Agilent E8491 IEEE 1394 PC Link to VXI
interfaces from your PC.
3 Close all other applications on your PC.
4 Insert the Agilent Automation- Ready CD with Agilent IO
Libraries Suite into the CD- ROM drive of your PC. Wait a few
seconds for the auto- run window to appear. If the auto- run
window does not appear automatically,
Click Start > Run... and type <drive>:\autorun\
•
auto.exe, where <drive> is your CD drive letter.
5 When the auto- run window appears, click Install Software
once, and wait for the InstallShield Wizard to appear.
6 When the InstallShield Wizard appears, click Next > to begin the
IO Libraries Suite software installation. Follow the instructions
in the InstallShield Wizard and choose the options according to
your preferences.
For more information to install the Agilent IO Libraries Suite,
refer to Agilent Technologies USB/LAN/GPIB Interfaces Connectivity
Guide available in the Agilent Automation- Ready CD with the file
name called "connectivity_guide.pdf".
Getting Started
on page 8.)
1
9