Table of Contents
Advertisement
Chassis Installation
The L-Mount kit is to be installed to your U2722A/U2723A module. The
following instructions describe the simple procedure of installing the
L-Mount kit and your module in the chassis.
1 Unpack the L-Mount kit from the packaging.
2 Remove your U2722A/U2723A module from the bumper casing.
3 Using a Phillips screwdriver, fasten the L-Mount kit to your
4 Insert your U2722A/U2723A module into the U2781A chassis with the
5 Once you have slotted in the module, tighten the screws of the L-Mount
U2722A/U2723A User's Guide
U2722A/U2723A module.
55-pin backplane connector positioned at the bottom of the module.
kit to secure the connection.
Getting Started
1
29
Advertisement
Table of Contents
