Table of Contents
Advertisement
N O T E
10 The U2722A/U2723A can also be connected remotely to the PC through
11 To connect through the E5813A, disconnect the U2722A/U2723A from
12 Then connect the E5813A in power-on state to the PC and the
13 The U2722A/U2723A is ready for use once the PC detects the
N O T E
U2722A/U2723A User's Guide
c Click Yes to begin the firmware download. The following message box
will appear indicating the download in progress.
Ensure that you do not remove the USB and power connection until the
firmware download has completed.
d Your U2722A/U2723A is ready for use once the firmware download
has completed.
Agilent E5813A Networked 5-Port USB Hub.
the PC while still powered on.
U2722A/U2723A.
connection.
Connection through the E5813A Networked 5-Port USB Hub can only be
established after the instrument is first connected directly to the PC.
Getting Started
1
21
Advertisement
Table of Contents
