Table of Contents
Advertisement
1
Getting Started
8 The Assign USB device alias window may appear. Each time the
9 For modules other than the U2300A Series, U2500A Series, U2600A
20
U2722A/U2723A is plugged in, this dialog box will appear. To disable
this dialog, select the Never show this dialog option in the Show this dialog
panel and click
.
OK
Series, and U2781A, the system will perform a firmware version check
on your connected module.
a If the module firmware version is the same as the installed version
on the PC, it will not perform any firmware download and the
U2722A/U2723A is now ready for use.
b If the module firmware version differs from the installed version on
the PC, the following message box will appear. Firmware versions
(V1.00 and V1.01) in the figure are for illustration purpose only, it
might vary depending on the device and PC firmware version.
U2722A/U2723A User's Guide
Advertisement
Table of Contents
