Safety; Service And Maintenance - IKONIX Associated Research HYAMP III Operation And Service Manual

Voltage:
The force which causes current through an electrical conductor, given in volts (V).
Symbol = V

1.4. Safety

This product and its related documentation
must be reviewed for familiarization with
safety markings and instructions before
operation.
This product is a Safety Class I instrument
(provided with a protective earth terminal).
Before applying power verify that the
instrument is set to the correct line voltage
(115 or 230) and the correct fuse is
installed.
This product carries an NRTL (Nationally
Recognized Testing Laboratory) and
comes equipped with an audible and visual failure indicator.

1.4.1. Service and Maintenance

User Service
To prevent electric shock do not remove the
instrument cover. There are no internal user
serviceable parts. Routine maintenance or
cleaning of internal parts is not necessary. Avoid
the use of cleaning agents or chemicals on the
instrument, as some chemicals may damage
plastic parts or lettering. Any external cleaning
should be done with a clean, dry or slightly damp
cloth. Schematics, when provided, are for
reference only. Refer servicing and certification to an Associated Research, Inc.
authorized service center.
ASSOCIATED RESEARCH, INC.
13860 WEST LAUREL DRIVE
LAKE FOREST, IL 60045-4546 U.S.A.
Service Interval
Associated Research, Inc. will not be held liable for injuries suffered if the instrument
is not properly maintained and safety checked annually. See section 1.1. Warranty
Policies for more information.
The HYAMP III produces
voltages and currents that
can cause harmful or fatal
electric shock. To prevent
accidental injury or death,
these safety procedures
must be strictly observed
when handling and using the
test instrument.
SAFETY
This instrument
meets UL
requirements for
audible and visual
failure indication.
PHONE: 1 (847) 367-4077
1 (800) 858-TEST (8378)
FAX: 1 (847) 367-4080
info@asresearch.com
E-MAIL:
5