Table of Contents
Advertisement
DC Charger
14. MAINTENANCE
The NB 120 series have been developed based on a revolutionary design concept that significantly simplifies
the tasks and reduces preventive and corrective maintenance times. Nonetheless, there are some actions and
revisions required.
Equipment statuses
Before detailing the maintenance procedure, it is convenient to define 2 possible statuses to carry out the
maintenance tasks. For more information, consult
CAUTION
Maintenance tasks must only be performed by qualified personnel and approved by the manufacturer.
Otherwise, the equipment may get damaged, and personnel could suffer severe injuries.
Use the necessary PPE according to the electrical risk and the OSHA regulations
WARNING
Before opening any door, be sure to follow insulation guidelines and all safety instructions. Failure to
do so may result in electric shock.
Make sure to follow the insulation guidelines and all safety instructions before opening any door or
handling the equipment internally. Otherwise, you may get an electric shock.
To carry out maintenance tasks or any activity inside the charger, the user must verify that there is no
voltage present in the equipment, as well as carry out the procedure of a
golden rules
to ensure that there are no dangerous voltages.
In addition to the recommendations given in this manual, local safety procedures and those specific to the
installation site must be taken into account. Also, local and national electrical regulations must be followed to
avoid personal injury and/or damage to the equipment.
Failure to comply with safety instructions and electrical codes may void the warranty.
Ford Pro contact info: chargingsupport@fordpro.com and 1-800-34-FLEET
"Equipment
statuses" section.
safe
NB 120 Installation Manual
14
stop. Always apply the
five
54
EN
Advertisement
Table of Contents
