Table of Contents
Advertisement
DC Charger
4. HANDLING AND TRANSPORTATION
CAUTION
Please read the following transport and installation instructions carefully.
Failure to follow the transport and installation instructions could result in damage to the equipment or injury to
persons.
Reception
The equipment is delivered packed. Upon receipt, inspect the equipment. In the event of damage to the
equipment, notify the logistics agent and the manufacturer within 24 hours of receipt. Verify that the goods
received correspond to the delivery note, models, and serial numbers.
Standard storage
Whenever possible, the equipment should be unloaded at its place of installation and operation.
If it is necessary to store the equipment, it must be kept in its original packaging and the following must be
followed to keep it in proper condition:
• Store the equipment indoors in a place protected against elements such as rodents, animals, excess
moisture (inside and outside the equipment), thermal radiation, direct solar radiation, contact with chemicals,
corrosive gases, etc.
• Store the equipment on a flat, level surface. Never rest the equipment on wooden beams
• Store equipment away from passageways where it may be damaged.
• Keep the covers on during storage.
• Keep the equipment packed until the time of installation.
• The temperature in the storage location must be between -40°C and +60°C and the relative humidity at
<95% without condensation.
NOTICE
Standard storage is defined as the expected time period from the time the equipment arrives at its
location until its commissioning occurs. It is assumed that this period is less than 6 months. This period
is variable according to the weather condition of the site.
Installer is responsible of deciding if the posts are installed within the standard period or otherwise, the
installation date is to be defined.
Ford Pro contact info: chargingsupport@fordpro.com and 1-800-34-FLEET
NB 120 Installation Manual
4
21
EN
Advertisement
Table of Contents
