Table of Contents
Advertisement
DC Charger
13. EMERGENCY STOP AND RESTART
The following steps must be taken to activate the emergency stop, and subsequent restart, of the equipment:
1.
Press the emergency stop pushbutton, located on the right side of the equipment.
2.
Verify that the reason for the hazard or emergency has been resolved.
3.
Reset the emergency pushbutton manually by rotating clockwise after verifying that everything is
normal.
4.
Verify the equipment has been successfully restarted.
NOTICE
Do not use the emergency stop pushbutton to perform regular stops on the charger. It should only be
used when an emergency occurs.
Otherwise, longevity of the main components could be shortened and result in equipment damage.
Ford Pro contact info: chargingsupport@fordpro.com and 1-800-34-FLEET
Emergency push-button
NB 120 Installation Manual
13
53
EN
Advertisement
Table of Contents
