Table of Contents
Advertisement
DC Charger
10. LOTO procedure
The aim of the lockout / tagout or LOTO procedure is to protect the user towards unintended reconnections and
to avoid risks associated with the control of energy sources.
This involves isolating, locking, and tagging the dangerous energy sources to avoid accidents / incidents mainly
derived from dangerous movements, unexpected energizations, or stored energy discharges.
Appropriate devices must be used, possible residual energies must be eliminated and, finally, the absence of
energies must be verified.
NOTICE
LOCKOUT / TAGOUT (LOTO)
Lockout / tagout standards establish procedures to protect personnel from hazardous energy sources on
equipment during service and maintenance.
Lockout/tagout disables equipment from producing hazardous amounts of electrical energy, allowing service
and maintenance personnel to safely perform their jobs. Employees must be trained to understand and follow
the hazardous energy control procedures.
Use only lockout/tagout devices authorized for particular equipment.
Lockout / tagout devices must be durable, standardized, and individual.
PPE is required according to standards while executing LOTO actions. Refer to section
further information and recommendations.
CAUTION
The shutdown of the equipment must only be carried out by personnel qualified. Read these instructions
and all safety recommendations carefully. Otherwise, the equipment could get damaged, and personnel get
seriously injured.
The instructions in this manual do not replace or local or national regulations. It is the user's responsibility
to comply with all safety standards that apply at the installation site.
Ford Pro contact info: chargingsupport@fordpro.com and 1-800-34-FLEET
NB 120 Installation Manual
10
"Safety
instructions" for
46
EN
Advertisement
Table of Contents
