Displaying Software License Information; Decommissioning The Product; Maintenance, Cleaning, And Repair; Maintenance - Ford LJ98-10C823-AC 48A Installation Manual

6.3 Displaying software license
information
You can view the open-source software license information
under the About option in the Ford Connected Charge
Station setup App. You must be logged into the same Wi-Fi
net- work as the Ford Connected Charge Station. Both
devices must be connected.

Decommissioning the product

7
The Ford Connected Charge Station must be
decommissioned by a qualified electrician.
The following steps apply:
1. Switch off the charge station circuit breaker.
2. Electrically disconnect the charge station and
ensure that open and hot connections are not
accessible.
3. Dispose of the Ford Connected Charge Station in
accordance with local and national rules and
regulations.

Maintenance, cleaning, and repair

8
8.1

Maintenance

The Ford Connected Charge Station does not require
routine maintenance other than periodic cleaning as
described below
Maintenance should only be carried out by a qualified
electrician and must be in accordance with local
regulations, standards, and requirements.
8.2

Cleaning

The Ford Connected Charge Station does not require any
routine maintenance other than periodic cleaning as de-
scribed below.
Use a dry cloth only to clean the Ford Connected Charge
Station. Never use aggressive cleaning agents, solvents,
fuel, or wax.
DANGER
High voltages.
Danger of fatal electric shock. Never clean the
charge station with a high-pressure cleaner or
similar device.
8
8.3

Repair

Unauthorized repair of the Ford Connected Charge Station
is not permitted. In the event of a failure, replace the entire
unit. Ford Motor Company Limited (Ford) reserves the
exclusive right to perform repairs to the charge station. The
only components that can be serviced are the design cover,
the charging cable and the remote dock. The charging cable
must be installed by a qualified electrician.
NOTICE
The charging cable can be replaced a maximum of
four times over the lifetime of the charge station.

Declaration of Conformity

9
Ford Motor Company Limited (Ford) hereby declares that
the radio equipment type "Ford Connected Charge
Station" conforms to ANSI/UL2594:2016 and to CAN/CSA-
C22.2 No. 280-16, No 281.1-12 and No. 281.2-12 applied
for general use of power supplies.
The Ford Connected Charge Station also conforms to
the following standards and regulations:
– ANSI/UL2594:2016
– UL2231-1, UL2231-2
– FCC Part 15, Subpart B and C
– NEC Article 625 compliant
The Ford Connected Charge Station was developed,
manufactured, tested, and supplied in accordance with
the above-mentioned standards and regulations, and in
accordance with the relevant standards for safety,
electromagnetic compatibility (EMC), and environmental
compatibility.
9.1 FCC and IC/ISED Compliance
Statement
This product features a Wi-Fi and Bluetooth connection.
De- vice registration IDs:
– FCC ID: Z64-WL18SBMOD
– IC ID: 451I-WL18SBMOD
– EMC Classification
– FCC Part 15 Class B
– CAN ICES-3 (B)/NMB-3(B)
SKLJ98-10C823-CA
This device complies with part 15 of the FCC Rules.
Operation is subject to the following conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Any change or modification to the device otherwise
could void the user's authority to operate the
equipment.
To comply with FCC/ISED RF Exposure requirements, this
device must be installed to always provide at least 20 cm
separation from the human body.
This device complies with Industry Canada's license-
exempt RSSs. Operation is subject to the following
conditions: (1) This device may not cause interference; and
(2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
Ford Connected Charge Station Installation Manual