Table of Contents
Advertisement
DC Charger
Minimum working distances
CAUTION
When installing the equipment, keep the minimum safety distances. Be aware of all the minimum
insulation requirements established by the applicable electrical code, as well as the thermal, safety and
accessibility requirements. The safety distances given in this section must not replace in any way the
mandatory regulations of the country in which the equipment will be installed.
For proper inspection and correct handling, it is important to leave clearance around the equipment. The
following image shows the recommended minimum distances:
Side to side distance:
Front side distance: As depicted in the following picture (top view), there is an additional space needed to
open the device doors, necessary for proper internal manipulation. For the necessary space regarding
accessibility, read de ADA regulation described in "Dimensions and weight" section.
Although this is the minimum distance between chargers, the distance between parking spaces to be able to
maneuver between two cars must also be considered, as well as the maximum range of the charging cable.
Rear side distance: It does not require a special rear space; it can be installed in touch with a wall or other
element.
Ford Pro contact info: chargingsupport@fordpro.com and 1-800-34-FLEET
NB 120 Installation Manual
DIMENSIONS
A
B
C
mm
190
65
140
in.
7.5
2.6
5.5
EN
D
E
750
690
29.5
27.2
27
Advertisement
Table of Contents
