DC Charger
Anchoring of the equipment
NOTICE
It is the installer's responsibility to correctly dimension posts anchoring to the foundation,
guaranteeing stability towards horizontal actions.
The equipment must be anchored to a solid and leveled surface (slab), see slab recommendations at the
basis" section.
The following image (bottom-up view) shows the location and diameter of the charger´s anchoring holes. They
are located at the foot of the charger.
A
B
mm
10
40
in.
0.39
1.57
It is recommended to use an expansive anchoring M16x145, with a tightening torque of 120 Nm (manufacturer's
recommendation). To guarantee the proper fixing of the equipment, install a total of 4 anchors.
Ford Pro contact info: chargingsupport@fordpro.com and 1-800-34-FLEET
C
D
E
52.5
340
235
20.67
13.39
9.25
NB 120 Installation Manual
F
G
H
482
560
650
18.98
22.05
25.59
"Site
EN
Ø
20
0.79
29