Table of Contents
Advertisement
DC Charger
Connectors
The charger has up to two independent charging cables with the standard CCS-1 connectors. The connector
brackets are located on each side of the equipment.
The following sections describe the parts of each type of connector.
CCS-1 connector
Handle grip
Charging process
The user must follow the instructions given below when performing a charging session:
1.
If the charger is available, activate the charging session from the display, mobile app, credit card or
RFID contact (depending on available options).
2.
Pick the corresponding connector referenced as A or B on the display.
3.
Connect the charger to the EV using the corresponding connector.
4.
Ensure that the charger side connector is securely locked in place on the vehicle side of the connector.
5.
If the session and communication between the charger and vehicle are established correctly, the
charging process will begin.
6.
Stop charging. The charging can be stopped in different ways:
•
When the vehicle has reached 100% the charge session stops automatically.
•
Through the display by selecting "Stop session".
•
Through RFID / payment card.
•
Through the vehicle control system.
•
By the operator CPO charge point operator.
7.
Once the charging has stopped, the connector will be released.
8.
Replace the connector back to the appropriate dock on the charger.
Ford Pro contact info: chargingsupport@fordpro.com and 1-800-34-FLEET
NB 120 Installation Manual
Locking
mechanism
EN
16
Advertisement
Table of Contents
