DC Charger
Advanced charge functionality
Simultaneous charging
Each charger allows simultaneous charging up to two electric vehicles. If one EV connected to the charger
all power blocks can be delivered to the EV. If two EV connected, the power blocks will be distributed into the
two outputs.
Open door detection
Door contact switches are used to detect if the front access door of the power cabinet is open. If the door is
open a charge session cannot be initiated, and an on-going session will terminate.
WARNING
The power cabinet door must be correctly locked after installation, service, or repair operations.
Regulatory framework
The NB 120 series are devices that are connected to the AC low-voltage network and provides a DC power
supply at a variable voltage of 150 to 1000 V for charging electric vehicles.
Its certification as a product in accordance with current US legislation is carried out through the evaluation,
where applicable, of compliance with the following standards:
• UL 2202: Electric Vehicle (EV) Charging System Equipment.
• NEC - Article 625: Electric Vehicle Charging Systems.
• FCC part 15 - class A: Unintentional radiators - industrial application.
Ford Pro contact info: chargingsupport@fordpro.com and 1-800-34-FLEET
NB 120 Installation Manual
17
EN