Table of Contents
Advertisement
DC Charger
5. External and internal tightening torques
Check the accessible connections of the Low Voltage circuit and retighten correctively only if necessary.
To do so, check that all tightening marks are in place. In the case of small screws that do not have marks,
good electrical practice will determine if a screw is loose.
Pay special attention to the input connections of the equipment, check the torque, and retighten.
6. Control circuit and protections
Check if overvoltage protectors are operational.
Visually check the fuses to guarantee they are not blown.
Check the good condition of the control cards, as well as its connections.
Ford Pro contact info: chargingsupport@fordpro.com and 1-800-34-FLEET
NB 120 Installation Manual
58
EN
Advertisement
Table of Contents
