Table of Contents
Advertisement
DC Charger
Status 1
1. Environmental condition
Verify that the equipment environment complies with the specifications. Verify that the humidity is adequate.
CAUTION
This task should be carried out annually. However, it should be done more frequently if climate
condition require so. This also affects tasks 1 and 2 of the dead revision (state 2).
Also, in installations with a high level of contamination, it may be necessary to carry out this task
more frequently. The review criteria are the following:
• Whenever pruning, mowing, grazing or similar tasks are carried out in the vicinity of the
equipment, which may produce the presence of plant or animal debris suspended in the air.
• When, due to human activities, climatic or biological reasons, the presence of solid remains in
the air susceptible to accumulate on the filters is detected in the area. In this case, it will be
enough to inspect the equipment that due to their location have been more exposed, and if dirt
is detected in them, the inspection will be generalized to the rest of the equipment at the plant.
2. Enclosure state
Check the enclosure is in good general state and no traces of corrosion or impacts are present. Check the
posts anchoring.
3. Remote access
Verify that the equipment can be accessed remotely. If it exists, verify the connection with a PC.
4. Display operation
Check if the operation of the display is correct: Check the good condition of the screen, cleanliness,
deterioration, or signs of any damage (impacts or breakage). Verify that the touch screen works on its entire
surface. Check that the lighting is correct and verify the interaction with the menu is smooth.
5. Ventilation system and absence of vibrations
Verify that there are no abnormal noises or oscillations in the ventilation system.
6. Charge connector operation
Check the condition of the charging cables and charging connectors, check that they are in good condition
and have no impact, cut or other marks.
7. Charge test
It is recommended to perform a complete charge on an electric vehicle to verify that it is finished correctly,
and the communications are working fine.
If the charge test is performed, it is the personnel responsibility to ensure the presence of an electric
vehicle to perform the charging procedure with each connector.
If the charge test is performed, the costs derived from it must be assumed by the customer.
Ford Pro contact info: chargingsupport@fordpro.com and 1-800-34-FLEET
NB 120 Installation Manual
56
EN
Advertisement
Table of Contents
