Resetting Panel; Starting Evacuation For Fire Alarm - Teletek electronics iRIS8 User Operation & Maintenance Manual

3.2.3. Resetting Panel

The resetting function is used for initializing the panel and return to normal operation mode after alarm or fault restoring.
When the panel is connected into network with other fire panels, the reset operation is applied to all other available
panels.

3.2.4. Starting Evacuation for Fire Alarm

At Access Level 2/3, the user can start immediate evacuation at the protected site(s) at any time, regardless if
there are received fire alarm events or not, including from other panels in the network.
In case of receiving of fire alarm event, iRIS8 will turn on automatically to the alarm events list, showing information for
the fire alarm. In that case the User can return to Main Screen pressing the MENU or EXIT button and to initiate
immediate Evacuation to this and/or other panels in the system.
Fire alarm in the system. Back counting time for leaving
the premises is running on. Press MENU or EXIT button to
return to Main Screen.
When the panel is connected into network with other fire panels, the user can select separate panels or all available
panels in the network for performing evacuation in the sites.
iRIS8 - Addressable Fire Alarm Panel – User & Maintenance Manual
The panel will return back to Main Screen as the
sounders are silenced, but the outputs Fire Brigade and
Fire Protection will stay in Fire alarm mode.
To clear the indication and to restore the outputs, the
User have to preform Resetting of the panel – see item
3.2.3.
To initiate resetting of the panel, press RESET (
button. The messages for alarms will be cleared and
panel will restore the normal operation mode of the
outputs. During the resetting, the animated icon
RESETTING
Attention: After resetting, the panel will send again all
events about its current status to the rest panels in the
network. Also, iRIS8 will receive the updated status for
events of the other reset panels.
Press EVACUATE (
evacuation in the site.
17
shows the process progressing.
) button to initiate immediate
)