Changing The Access Level; Logging Out; Quick Log Out; Auto Log Out - Teletek electronics iRIS8 User Operation & Maintenance Manual

Addressable fire alarm control panel

Hide thumbs Also See for iRIS8:

Table of Contents

iRIS8 - Addressable Fire Alarm Panel – User & Maintenance Manual

3.3. Changing the Access Level

The Access Level is changed from the Main Screen, pressing the ACCESS Button.

Press ACCESS button to change the Access Level.

There are two ways for logging out from Access Levels 2/3 to the lower User Level 1 without need of entering a code

combination.

Press ACCESS button for changing the user Level.

Press LOG OUT button for quick logging out.

According the programmed parameters of iRIS8 fire alarm panel, it is possible automatic logging out from the current

set Access Level 2 or 3 after a time period and no operation with the panel. The time period for automation log out is

The available panel numbers in the network (1-64) are

presented with active buttons in blue. The number of the

panel (from which the evacuation is introduced) is

presented as unavailable (number 1 in the example).

The user can start immediate Evacuation in some exact

panels as pressing the button with the respective number.

Or, can use the quick buttons: ALL for Evacuation in all

panels in the network at the same time; or THIS – just for

iRIS8.

Use the digit buttons to enter in the text field a valid

access code. The default code combinations are

described in item 1.4.

The entered code is visualized with asterisks. Confirm the

code with OK button. Use the backspace button to delete

entered digits and edit the code.

In case the entered code is invalid, the panel will return to

Main Screen without changing the Access Level.

Access Level 1 is set for operation.

Table of Contents