Access Level 2/3; Silencing Buzzer; Silencing Alarm - Teletek electronics iRIS8 User Operation & Maintenance Manual

iRIS8 - Addressable Fire Alarm Panel – User & Maintenance Manual

3.2. Access Level 2/3

At Access Level 2/3 the users can perform:
- Review events for the panel and the network – see the details in item 2.3.2.
- Silence Buzzer of the panel or other fire panels in the network – see the details in item 3.2.1.
- Silence Alarm in the protected sites of the panel, or for network - all connected fire panels or some of them –
see the details in item 3.2.2.
- Reset the panel and all other fire panels in the network – see the details in item 3.2.3.
- Evacuation Fire Alarm of the protected sites to all connected fire panels or some of them – see the details in
item 3.2.4.
The Main Screen at Access Level 2/3 and no active messages for events:
At Access Level 2/3, in case of receiving new messages for Faults and/or Disablement events, the panel will
automatically switch on from Main Screen to events' list. User can return back to Main Screen pressing buttons EXIT or
MENU.

3.2.1. Silencing Buzzer

The process for silencing of the internal buzzer at Access Level 2/3 is the same as described at item 3.1.1.

3.2.2. Silencing Alarm

In case of receiving of fire alarm event, the panel will turn on automatically to the alarm events list, showing information
for the fire alarm. In that case the User can return to Main Screen, pressing the MENU or EXIT button and to Silence the
sounders (alarm) in the system.
Alarm in the system. The sounders are activated. Press
MENU or EXIT button to return to Main Screen.
When the panel is connected into network with other fire panels, the user can select separate panels or all available
panels in the network for silencing the alarm.
Press SILENCE ALARM (
sounders for the moment.
The available panel numbers in the network (1-64) are
presented with active buttons in blue. The number of the
panel (from which the silencing action is introduced) is
presented as unavailable (number 1 in the example).
The user can silence the sounders in some exact panels
pressing the button with the respective number. Use
button ALL to silence the sounders in the whole network;
or button THIS for silencing the sounders just for the
iRIS8 itself.
16
) button to silence the