Silencing Buzzer; Starting Evacuation For Fire Alarm - Teletek electronics iRIS8 User Operation & Maintenance Manual

3.1.1. Silencing Buzzer

The internal buzzer of the panel is signalling with a continuous sound signal in case of activated alarm and short beeps
for fault events, in the network. The buzzer signalization can be silenced (for the moment) pressing the SILENCE
BUZZER button from the Main Screen.
When the panel is connected into network with other fire panels, the user can select separate panels or all available
panels in the network for silencing the buzzer.
Return back to Main Screen pressing EXIT or MENU
button. Next, to silence the internal buzzer, press
SILENCE BUZZER (
The user can silence the buzzer in some exact panels as pressing the button with the respective number. Or, can use
the quick buttons: ALL to silence the buzzer in all panels in the network at the same time (including the iRIS8 panel);
and THIS to silence just the buzzer of the iRIS8. After pressing buttons ALL or THIS, the panel returns back to Main
Screen. You can reject the operation and return back to Main Screen pressing EXIT or MENU button.

3.1.2. Starting Evacuation for Fire Alarm

At Access Level 1 is possible to start immediate Evacuation in the site(s), only when the fire alarm signal is
received from a fire detector in a zone.
In case of receiving of fire alarm event from a detector, the panel will turn on automatically to the alarm events list,
showing information for the fire alarm. In that case the user can return to Main Screen pressing the MENU or EXIT
button and to initiate immediate Evacuation to one or more panels in the system.
Alarm from a fire detector. Back counting time for leaving
the premises is running on. Press MENU or EXIT button to
return to Main Screen.
When the panel is connected into network with other fire panels, the user can select separate panels or all available
panels in the network for performing evacuation of the sites.
iRIS8 - Addressable Fire Alarm Panel – User & Maintenance Manual
) button.
The available panel numbers in the network (1-64) are
presented with active buttons in blue. The number of the
panel (from which the silencing action is introduced) is
presented as unavailable (number 1 in the example).
Press EVACUATE (
evacuation in the site(s).
The available panel numbers in the network (1-64) are
presented with active buttons in blue. The number of the
panel (from which the evacuation is introduced) is
presented as unavailable (number 1 in the example).
The user can start immediate Evacuation for some exact
panels as pressing the button with the respective number.
Or, can use the quick buttons: ALL for Evacuation in all
panels in the network at the same time; or THIS – just for
the iRIS8 panel.
15
) button to initiate immediate