GE MAC 5 A4 Operator's Manual page 317

12. Click Next.
The MUSE API Configuration Tool window opens.
13. In the End Point Configuration area of the window, select the protocol(s) you are
using to communicate with MUSEAPI3 and enter the port value(s).
You must have at least one protocol enabled, and you may have more than one.
If any protocols are selected that you do not want, remove the check mark.
You are advised to use the values below for the ports:
Protocol
HTTP
HTTPS
net.tcp
NOTE:
14. Click Save & Exit to save the changes to the End Point Configuration.
The InstallShield Wizard Complete window opens.
5864335-001-1
For more information on the available communication protocols, see
116: MUSEAPI3 Installation Prerequisites on page
MAC ™ 5 A4/MAC
Configure the MUSE System for Network Communication
Recommended Port Values
8100
The port for SSL, as configured by the customer.
8101
312.
™ 5 A5/MAC ™ 5 Lite
Table
317