Configure Settings
2.
Enable wireless and configure the authentication protocol as per the information
in the table.
Table 75: Configure Wireless Authentication Protocol
Field
Network
Status
SSID
Authentication
Protocol
232
Action
Description
Enable or disable
•
this setting.
•
Default value: Disabled
Enter the Service
Default value: No default value
Set Identifier
Allowed value: Any value (site-specific)
(SSID) for your
WLAN.
Select a value
Different fields display based on the protocol you select.
from the drop-
Default value: Open
down list to
configure the
Allowed values:
protocol that
•
your site uses
to authenticate
•
the transfer of
•
data between the
device and other
•
entities on the
WLAN.
MAC
™
5 A4/MAC
™
5 A5/MAC
If this setting is enabled, the WLAN connection to
the device is enabled.
If this setting is disabled, the WLAN connection to
the device and the remaining fields are disabled.
Open*
WEP*
WPA*
WPA2
™
5 Lite
5864335-001-1