GE MAC 5 A4 Operator's Manual page 220

Configure Settings
Field
Server Port
Number
Use CA
Certificate
Use TLS
Encryption
Default
Domain Name
5. Select Test Connection to test the connection to the LDAP server.
• If the connection is successful, a success message displays.
220
Action Description
Enter a valid This field is enabled if the LDAP option is enabled.
LDAP service port
No default value.
number.
Allowed values: 1 to 65535
Enable or disable This field displays only if an ldaps URL is configured.
this option.
If this option is enabled, a CA certificate is required to
authenticate and connect to the LDAP server. Install
a CA certificate. See
page
If this option is disabled, a CA certificate is not required
to connect to the LDAP server. The data is encrypted
regardless of whether a CA certificate is installed.
NOTE:
Default value: Disabled
Enable or disable This field displays only if an ldap URL is configured.
this option.
If this option is enabled, the connection to the
configured LDAP server is encrypted.
If this option is disabled, the connection to the
configured LDAP server is not encrypted.
Default value: Disabled
Enter a valid This field is enabled if the LDAP option is enabled.
domain name.
This domain name is used if the LDAP user does not
enter a domain name to login. If a local user with the
same user name exists, then an LDAP user must enter
the domain name and user name in the User Name
field of the Login screen.
No default value.
Allowed values:
•
•
•
•
MAC ™ 5 A4/MAC ™ 5 A5/MAC
Install LDAP SSL CA Certificate on
225.
GE Healthcare recommends that you use a CA
certificate when you connect to the LDAP server. If
you do not use a CA certificate, the device runs the
risk of connecting to an unauthorized LDAP server,
potentially enabling an attacker to gain full access
to the device and any data that is stored on it.
A to Z
a to z
0 to 9
All special characters
™ 5 Lite 5864335-001-1