Table of Contents
Advertisement
Configure Settings
b)
c)
d)
9.
To delete an existing DCP server destination:
170
Make changes to the destination as per the information in the table below.
Table 48: Modify a DCP Server Destination to Send Reports
Field Name
Action
Destination
Modify the name of the DCP server
Name
destination where the reports will be sent, if
required.
Server Name
Modify the URL of the DCP server, if required.
NOTE:
•
•
•
•
ADT Query
Enable or disable this setting.
Select Test Connection.
• If the test displays Test Successful, you have a successful connection to
that destination. Select Update to save the destination.
• If the test displays Test Failed, you do not have a connection to that
destination. Troubleshoot the connection failure depending on the error,
re-test and add the connection.
Select Save.
MAC
™
5 A4/MAC
™
5 A5/MAC
Make sure that you append
'/SendTest' to the URL. For
example,
http://<IP_Address> or
<Hostname>:<Port>/SendTest.
Confirm that the URL for the server is
correct.
Confirm that the DCP server is
running.
Make sure that you configure the IP
address of the DCP destination with
ADT enabled and the destination in
the MUSE Order Server settings is
same for a remote query.
™
5 Lite
Description
A user-defined value
up to 20 characters.
Allowed values:
•
A to Z
•
a to z
•
0 to 9
•
All special
characters
A user-defined value.
Allowed values:
•
A to Z
•
a to z
•
0 to 9
•
All special
characters
If this setting
is enabled, the
destination is
configured to
perform ADT query.
Default value:
Disabled
5864335-001-1
Advertisement
Table of Contents
