Table of Contents
Advertisement
Configure Settings
Field
Disable User
Force User
to Change
Password at
Next Login
6.
Select Apply.
7.
Repeat steps
8.
Select Save.
9.
To edit an existing user profile:
a)
b)
c)
d)
10. To delete an existing user profile:
a)
b)
c)
d)
Configure LDAP
Make sure that your user role is assigned the user management privilege.
Full Authentication with Stat must be configured for LDAP authentication.
1.
Select Settings > User Account > LDAP.
216
Action
Enable or disable
this setting.
Enable or disable
this setting.
to
to add more user profiles.
4
6
To enable the edit mode, select anywhere in the row of the user profile you
want to modify.
Make changes to the user profile as per the information in
Configure User Profiles on page
Select Apply.
Select Save.
To enable the edit mode, select anywhere in the row of the user profile
configuration you want to delete.
Select Delete.
A message displays to confirm if you want to delete the user profile.
Select Yes to confirm the deletion of the user profile.
Select Save.
MAC
™
5 A4/MAC
™
5 A5/MAC
Description
•
If this setting is enabled, the user is disabled from
using the device.
•
If this setting is disabled, the user is enabled to
access the device.
Default value: Disabled
•
If this setting is enabled, the user must change the
password at the next login.
•
If this setting is disabled, the user does not need to
change the password at the next login.
Default value: Enabled
NOTE:
This setting is always disabled for default Service
user.
214.
™
5 Lite
Table 67:
5864335-001-1
Advertisement
Table of Contents
