GE MAC 5 A4 Operator's Manual page 237

7. Configure the setting to obtain the IP address automatically or manually as per
the information in the table.
Table 80: Enable or Disable DHCP
Field Name
Obtain IP
Address
Automatically
IPV4 Address
Subnet Mask
Gateway
Address
Primary DNS
Secondary
DNS
Device MAC
Address
5864335-001-1
Action Description
Enable or disable Automatically obtains the IP address.
this setting.
• If this setting is disabled, the fields to configure
the IP address, subnet mask, gateway address,
primary DNS, and, the secondary DNS, if any, to
communicate with the WLAN display. Enter these
values in the respective fields.
• If this setting is enabled, the device automatically
obtains an IP address (DHCP) to communicate with
the WLAN. The remaining fields are hidden.
Default value: Disabled
Enter the static This field displays if Obtain IP Address Automatically is
IPV4 address for disabled.
the device.
Default value: No default value
Allowed values: A valid IPV4 address
Enter the subnet This field displays if Obtain IP Address Automatically is
mask identifying disabled.
the subnet that
Default value: No default value
the device's IPV4
address belongs.
Allowed values: A valid subnet mask
Enter the gateway This field displays if Obtain IP Address Automatically is
IP address for the disabled.
router to use as
Default value: No default value
the default route
setting for the
Allowed values: A valid IPV4 address
device.
Enter the primary This field displays if Obtain IP Address Automatically is
Domain Name disabled.
Service (DNS) that
This field is optional.
the device uses.
Default value: No default value
Allowed values: A valid IPV4 address
Enter the This field displays if Obtain IP Address Automatically is
secondary DNS disabled.
that the device
This field is optional.
uses.
Default value: No default value
Allowed values: A valid IPV4 address
Display MAC This field is not editable.
address for the
device.
MAC ™ 5 A4/MAC ™ 5 A5/MAC ™ 5 Lite
Configure Settings
237