GE MAC 5 A4 Operator's Manual page 254

Configure Settings
Field
Send Log
IP Address
Port No
Log level
TLS Encryption
4. If TLS Encryption is enabled, the Install Certificate field displays, do the steps
that follow to install the TLS certificate:
a)
b)
c)
d)
5. Select Test Connection to test the connection to the configured server.
NOTE:
254
Action
Enable or disable this
setting.
Enter IP address of the
configured log server.
Enter a valid port
number of the
configured log server.
From the drop-down
menu, select the
desired Log level.
Enable or disable this
setting.
Select Browse.
The Certificate-Browse window opens and displays the message: No
Certificate Installed
Select the valid certificate from the list.
Select Install. A success message displays.
Select Back.
The Log Server window displays. The Installed message is shown in the
Install Certificate field.
The maximum time to complete the test connection for TLS Encryption is 60
seconds.
MAC ™ 5 A4/MAC ™
Description
If this setting is enabled, the device transmits
the captured system logs and event logs to the
configured server location.
Default value: Disabled
Allowed values: A valid IP address
Default value: No default value
If you enter an invalid IP address, the outline of IP
Address field turns red.
Allowed values: 1 to 65535
No default value.
Default value: Information
Allowed values:
• Information
• Warning
• Error
The information related to selected Log level type
is transmitted to configured server.
If this setting is enabled, the connection to the
configured server is encrypted.
If this setting is disabled, the connection to the
configured server is not encrypted.
Default value: Disabled
5 A5/MAC ™ 5 Lite 5864335-001-1