Show Network Connection Status - GE MAC 5 A4 Operator's Manual

Configure Settings
2. Configure the proxy settings as per the information in the table.
Table 81: Configure Proxy Settings
Field
Network Proxy Enable or disable
HTTP Proxy
HTTPS Proxy
3. Save and close the screen.
The Acquisition screen displays.

Show Network Connection Status

When the wireless and wired connection is set to Enable, the device uses a wired
connection when you connect a Local Area Network (LAN) cable. If you remove the
LAN cable, the device uses the wireless connection.
244
Action Description
•
this setting.
•
Default value: Disabled
Enter the IP Default value: No default value
address and port
Allowed values: A valid IPV4 address and port number
number of the
HTTP proxy.
Enter the IP Default value: No default value
address and port
Allowed values: A valid IPV4 address and port number
number of the
HTTPS proxy.
MAC ™ 5 A4/MAC ™ 5 A5/MAC
If this setting is enabled, the HTTP Proxy and HTTPS
Proxy fields display. You can configure the proxy
settings.
If this setting is disabled, the HTTP Proxy and HTTPS
Proxy fields are hidden. You cannot configure proxy
settings.
™ 5 Lite 5864335-001-1