Configure Network - GE MAC 5 A4 Operator's Manual

Configure Settings
1. Connect the USB flash drive containing the CA certificate to the device.
2. Select Settings > User Account > LDAP.
3. Select LDAP to view the LDAP settings.
4. Enable LDAP setting.
5. Perform the steps below to install a CA certificate:
a)
b)
Delete LDAP SSL CA Certificate
Before you start this procedure, make sure that your user role is assigned with user
management privilege.
1. Select Settings > User Account > LDAP.
2. Select LDAP to view the LDAP settings.
3. Enable LDAP setting.
4. Perform the steps below to delete the currently installed CA certificate:
a)
b)
c)

Configure Network

You can configure and enable both wired and wireless network connections on
the same device. If you enable the wireless and wired connection, the device
automatically switches to the wired connection when you connect the LAN cable. If
you remove the LAN cable, the device uses the wireless connection.
Select Settings > Network menu to configure the following:
• Shared Network -
• Device Host Name -
• Wired Network -
• Wireless Network -
226
Select Browse from the Install Certificate field and select the CA certificate
from the USB flash drive.
Select Save.
• If the installation is successful, the CA certificate is saved and the Install
Certificate dialog is closed.
• If the installation fails because the certificate is in an unrecognized
format, an error message displays.
Select the Browse setting.
The currently installed certificate displays.
Select Delete.
A message displays asking you to confirm the deletion of the certificate.
Select Yes. The certificate or key is deleted.
Configure Shared Network Settings on page 227
Configure Device Host Name on page 228
Configure Wired Network on page 229
Configure Wireless Network on page 231
MAC ™ 5 A4/MAC ™ 5 A5/MAC ™ 5 Lite 5864335-001-1