Configure Hardware; Configure The Barcode - GE MAC 5 A4 Operator's Manual

Configure Settings
Table 88: Region Settings
Field
Language
Height and
Weight Unit
Input Method
3. Select Save.

Configure Hardware

Select Settings > Hardware menu to configure the settings below:
• Barcode -
• USB Ports -
• Keyboard Tone and KISS Pump -
261
• Standby Modes -

Configure the Barcode

NOTE:
260
Action
Set the default
language of the
device.
Select the height
and weight unit
of measurement
to be used on the
device.
Select a value
from the drop-
down list to
configure input
method editor for
the device.
Configure the Barcode on page 260
Configure the USB Ports on page 261
Configure Standby Modes on page 262
The device is compatible with the MAC 5 external barcode reader
(2030360-018), which supports reading barcodes containing the symbologies
below for all supported languages:
• Code-128
• PDF417
• Code 39
• Interleaved Code 2 of 5
MAC ™ 5 A4/MAC ™
Description
Default value: English
Allowed values: List of supported languages
The configured unit of measurement is applied in
the Patient Information screen and the ECG patient
reports.
If the device language is English, Chinese, or Finnish and
the device settings are restored to factory defaults, the
unit of measurement is automatically set as in/lb.
If the device language is Danish, Dutch, French,
German, Italian, Swedish, or Norwegian and the device
settings are restored to factory defaults, the unit of
measurement is automatically set as cm/kg.
• If you select Chinese-Pinyin, the input method is
available to the user to enter Simplified Chinese text.
• If you select None, no input method is available to
the user.
Default value: None
Configure Keyboard Tone and KISS Pump on page
5 A5/MAC ™ 5 Lite 5864335-001-1