Replacing boards and components
Basic system operating panel
Disconnect the plugs for the operating panel from board D1.
Remove the cable clamps to the operating panel.
Remove the Allen screws on the mounting ring (swivel joint of the operating panel).
Replace the operating panel.
Reinstall the mounting ring.
Reconnect the cable.
Reattach the cable clamp.
Perform a function test of the operating panel.
© Siemens, 2008
For internal use only
SPR2-230.840.01.01.02
08.08
Page 85 of 148
CS PS SP
85
6.4
SIREMOBIL Iso-C