Memoskop, Configuration And Country-Specific Language (User Setup) - Siemens SIREMOBIL Iso-C Troubleshooting Manual

78
Use the MEMOSKOP service program to modify the configuration.
With installed MEMOSKOP keyboard:
On the MEMOSKOP, reconnect the video cable from OUT 1 to OUT 2.
Press CTRL + T at the same time on the MEMOSKOP keyboard; TECHNICAL SETUP
is called up and is now visible on the monitor.
Call up the menu "Number of monitors" by pressing the "3" key and subsequently the
"RETURN" key on the MEMOSKOP keyboard.
With the -> and <- cursor keys, set the number to 1 monitor and press the "RETURN"
key. The text display disappears on the monitor.
Press the "RETURN" key once more.
Reconnect the monitor to the OUT 1 video output. The text display is now visible on the
monitor.
Exit TECHNICAL SETUP by pressing the "HOME" key on the MEMOSKOP keyboard.

MEMOSKOP, configuration and country-specific language (User Setup)

Start the MEMOSKOP service program and transfer the country-specific language to
SIREMOBIL Iso-C via the service PC.
NOTE
SIREMOBIL Iso-C
After completing the MEMOSKOP configuration, save the
parameters on a diskette. Exit the service program and
switch the SIREMOBIL off and back on again.
SPR2-230.840.01.01.02
08.08
Adjustments / Programs
Page 78 of 148
CS PS SP
0
© Siemens, 2008
For internal use only