Siemens SIREMOBIL Iso-C Troubleshooting Manual page 110

110
Storage of Dose on disk
Dose on Hardcopy output
Perform IQ quick test.
NOTE
SIREMOBIL Iso-C
Replacing boards and components
If dose-area product measurement device is present (Dia-
mentor), configure Yes. Otherwise configure No.
If dose-area product measurement device is present (Dia-
mentor), configure Yes. Otherwise configure No.
With present MODULARIS system, the parameters for the
Litho program have to be set again according to the LITHOS-
TAR MODULARIS Service Instructions.
SPR2-230.840.01.01.02
08.08
Page 110 of 148
CS PS SP
© Siemens, 2008
For internal use only