Interface Board D30 - Siemens SIREMOBIL Iso-C Troubleshooting Manual
Hide thumbs
Also See for SIREMOBIL Iso-C:
- Service instructions manual (128 pages) ,
- Maintenance instruction (46 pages) ,
- Installation and setting instructions manual (6 pages)
Table of Contents
Advertisement
82
Interface board D30
Replace interface board D30.
Check the +27 V /+24 V /+24 V voltage. Adjust, if necessary. See
ing voltages / p. 30)
Check the radiation release / format switch over / vertical column travel / brakes func-
tions.
SIREMOBIL Iso-C
Replacing boards and components
in these instructions, Checking the operating voltages.
SPR2-230.840.01.01.02
08.08
Page 82 of 148
CS PS SP
6.2
(Checking the operat-
© Siemens, 2008
For internal use only
Advertisement
Table of Contents
