Lifting And Tie Down - JLG 800S Operation & Safety Manual

Machine Operation
If parking a MEWP with the boom elevated in an effort to conserve space, booms
may be elevated, but shall not be extended. It is the operator's responsibility to
ensure all safety precautions in Section 1 of this manual are followed for each
unique situation.

4.23 LIFTING AND TIE DOWN

4.23.1 Lifting
1. Refer to the Machine Serial Number Plate, call JLG Industries, or weigh the
individual unit to find out the Gross Vehicle Weight.
2. Place the boom in the stowed position.
3. Remove all loose items from the machine.
4. Properly adjust the rigging to prevent damage to the machine and so the
machine remains level.
4.23.2 Tie Down
When transporting the machine, the boom must be fully lowered into the boom
rest.
1. Place the boom in the stowed position.
2. Remove all loose items from the machine.
3. Secure the chassis using straps or chains of adequate strength.
4. Ensure the platform is lowered so the wear pad on the bottom rests on the surface
of the transportation vehicle.
82
NOTICE
NOTICE
31222372 800S, 860SJ