Table of Contents
Advertisement
Machine Operation
Do not attempt to tow machine unless equipped with complete tow package from
manufacturer.
Do not tow machine with engine operating or drive hubs engaged.
Prior to towing the machine, complete the following:
1. Retract, lower and position boom over rear drive wheels in line with direction of
travel; lock turntable.
2. Connect tow bar to front of frame with attach pins, and tow bar to towing vehicle.
3. Disconnect drive hubs by inverting disconnect cap. Refer to
Disconnect Hub, page
4. Actuate steer/tow selector valve for towing; pull valve knob Out to float position.
(This opens the steer circuit to reservoir, allowing the steer cylinder rod free
travel.) The machine is now in the towing mode.
A — Drive Hub Disconnected
B — Drive Hub Engaged
After towing the machine, complete the following:
1. Actuate steer/tow selector valve for steering; push valve knob In to the actuated
position.
80
WARNING
CAUTION
80.
Figure 17. Drive Disconnect Hub
1. Drive Hub
2. Disconnect Cap (REVERSED)
31222372
Figure — Drive
3. Disconnect Cap
800S, 860SJ
Advertisement
Table of Contents
