Table of Contents
Advertisement
Accessories
•
Do not use electrical tools in water.
•
Do not cut platform.
•
Do not ground through the platform.
•
Wear proper cutting apparel.
•
Do not drive machine while connected to external air/gas sources.
6.13.2
Generator Output
Engine Speed of 1800 rpm +/- 10%.
ANSI Specifications:
•
3-phase: 240 V, 60 Hz, 7.5 kW
•
1-phase: 240 V/120 V, 60 Hz, 6 kW
6.13.3
Preparation and Inspection
•
Connect ground clamp to metal being cut.
•
Ensure there is a good ground connection.
6.13.4
Operation
Start the engine, turn on the generator, then turn on the plasma cutter.
See the Miller Plasma Cutter Owner's Manual (PN 3128420) for more information.
118
31222372
800S, 860SJ
Advertisement
Table of Contents
