Emergency Towing Procedures - JLG 800S Operation & Safety Manual

Hide thumbs Also See for 800S:
Table of Contents

Advertisement

5.4

EMERGENCY TOWING PROCEDURES

Runaway vehicle/machine hazard: Machine has no towing brakes. Towing vehicle
must be able to control machine at all times. On-highway towing not permitted.
Failure to follow instructions could cause serious injury or death.
Maximum towing speed 5 mph (8 km/h)
Maximum towing grade 25%.
Prior to towing the machine, complete the following:
Do not tow machine with engine operating or drive hubs engaged.
1. Retract, lower and position boom over rear drive wheels in line with direction of
travel; lock turntable.
2. Disconnect drive hubs by inverting disconnect cap. Refer to
Disconnect Hub, page
3. Reconnect the drive hubs by inverting the disconnect cap when towing is
complete.
800S, 860SJ
WARNING
WARNING
CAUTION
96.
31222372
Emergency Procedures
Figure — Drive
95

Advertisement

Table of Contents
loading

This manual is also suitable for:

860sj

Table of Contents