Table of Contents
Advertisement
Fuel Select (Dual Fuel Engine Only) (If Equipped)
Moving the switch to the appropriate position selects gasoline or liquid propane
fuel.
Function Speed Control
This control knob affects the speed of Telescope, Jib Lift (if equipped), and
Platform Rotate.
Note: During platform rotation, a speed difference may not be noticeable to
the operator.
Turning the knob all the way counterclockwise until it clicks puts the machine
into Creep Mode. Creep Mode puts the functions listed above, as well as Drive/
Steer and Main Lift/ Swing functions into the slowest speed setting.
Note: To operate the Main Boom Lift/Swing joystick, pull up on the locking
ring below the handle.
Note: The Main Boom Lift/Swing joystick is spring loaded and will
automatically return to neutral (Off) position when released.
Horn
A push-type Horn switch supplies electrical power to an audible warning device
when pressed.
Jib Lift (If Equipped)
Provides raising and lowering of the jib.
Lights (If Equipped)
This switch operates the chassis or head and tail lights package if equipped on
the machine.
Note: The Platform/Ground Select Switch does not shut off power to operate
the lights. To avoid draining the battery, the lights must be shut off
using the light switch.
Main Boom Telescope
Provides extension and retraction of the main boom.
800S, 860SJ
Machine Controls and Indicators
31222372
51
Advertisement
Table of Contents
