Machine Lifting And Tie Down - JLG ES1330L Operation & Safety Manual

If driving machine with the platform control station from ground, do not hang the
control box on any part of the machine while driving. Hold the control box and
keep at least 3 ft (1 m) distance from machine.

3.14 MACHINE LIFTING AND TIE DOWN

3.14.1 Lifting
The machine may be lifted using a forklift truck. Lift only using the built-in forklift
pockets on the side of the machine and only with the platform in the stowed position.
First adjust the width of the lifting tines to fit the machine forklift pockets (1, 2). Then
slide the lifting tines into the forklift pockets and carefully lift machine.
1. Forklift Pocket
The machine can also be lifted using a spreader bar and four equal length straps or
chains capable of supporting the full gross weight of the machine. Lift only using the
two lift lugs at the rear of the frame and the two tie-down/lift lugs at the front of the
machine.
ES1330L, ES1530L
Machine Controls, Indicators, and Operation
WARNING
2. Forklift Pocket
31221553
55