Table of Contents
Advertisement
Machine Operation
4.3
STABILITY
Machine stability is based on two (2) conditions which are called Forward and Backward
stability. The machine's position of least Forward stability is shown in (See
its position of least Backward stability is shown in (See
To avoid forward or backward tipping, do not overload machine or operate the
machine beyond the limit of the maximum operating slope.
1. Rotate platform 90°.
2. Boom fully elevated.
3. Turntable rotated 90° from stowed position.
4. Machine will tip over in the direction if overloaded or operated beyond the limits
of the maximum operating slope.
60
WARNING
4
Figure 11. Position of Least Backward Stability
31222372
, page
60)
1
2
3
BM000409A
, page
61) and
800S, 860SJ
Advertisement
Table of Contents
