JLG 800S Operation & Safety Manual page 127

Note: Override is only required to be engaged if the operator desires to move the plat-
form closer to an object that is in or entering the stop zone.
SkyGuard operation is affected when SkySense is installed on a machine. If
SkySense activation occurs prior to SkyGuard activation, SkyGuard will only cut out
functions if activated. If SkyGuard activation occurs prior to SkySense activation,
SkyGuard will function normally.
6.16.6 SkySense Coverage Areas
Figure 43. SkySense Coverage Level 1
Areas (2– Bar)
Note: Sensor Cones shown are approximations for reference only.
800S, 860SJ
NOTICE
BM000009A
Figure 44. SkySense Coverage Level 2
31222372
Accessories
Areas (3 — Bar)
BM000010A
127